Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Signal Channel:
Voltage inputs: Single-ended (A) or differential (A-B)
Sensitivity/Output Scale:
1 nV to 1 V (voltage input),
1 fA to 1 µA (current input)
Voltage Input range: 10 mV to 1 V (peak)
Current input range: 1 µA or 10 nA (peak)
Max input before overload: 1 V (peak) or 1 µA (peak)
Input impedance:
Voltage input: 10 MΩ + 25 pF, AC (>1 Hz) or DC coupled
Current input: 1 kΩ or 100 Ω to virtual ground
Gain accuracy: ±1 % (<200 kHz), ±2 % (to 500 kHz). Signal amplitude must be less than 30 % of input range.
Noise: 2.5 nV/√Hz at 1 kHz (10 mV input range, typ.)
Reference Channel:
Frequency range: 0.001 Hz to 500 kHz
Timebase: 10 MHz In/Out (phase locks the internal frequency to other SR860s.)
Input impedance: 1 MΩ or 50 Ω
Phase setting resolution: (360/232) degrees
Phase noise:
Int. reference: <0.0001° rms at 1 kHz (100 ms, 12 dB/oct)
Ext. reference: (typ) <0.001° rms at 1 kHz (100 ms, 12 dB/oct)
Demodulator:
DC stability: Digital output values have no offset drift
Time constants: 1 µs to 30 ks
Low pass filters: Typical RC-type filters or advanced Gaussian/Phase-Linear filters
Filter slope: 6, 12, 18 or 24 dB/oct rolloff
Internal Oscillator:
Frequency: 1 mHz to 500 kHz
Frequency accuracy: 25 ppm + 30 µHz (with internal timebase)
External timebase: 10 MHz timebase input/output on rear panel
Frequency resolution: 6 digits or 0.1 mHz (whichever is greater)
Sine Output:
Outputs: Differential or single-ended
Output impedance: 50 Ω source
Amplitude resolution: 3 digits or 1 nV, whichever is greater
DC offset: ±5 V, differential or common mode
Offset resolution: 3 digits or 0.1 mV, whichever is greater
Output limit: ±6 V, sum of DC offset and peak amplitude
Data:
Data channels: 4 data channels are displayed and graphed (green, blue, yellow, orange)
Data sources: Each data channel can be assigned any of these data sources: X, Y, R, Θ, Aux In 1 to 4, Aux Out 1 to 2, X noise, Y noise, Sine Out Amplitude, Sine Out DC Level, Reference Phase, or Reference Frequency
Inputs and Outputs:
CH1 output: Proportional to X or R, ±10 V full scale thru 50 Ω
CH2 output: Proportional to Y or Θ, ±10 V full scale thru 50 Ω
X and Y rear-panel outputs: Proportional to X and Y, ±10 V full scale thru 50 Ω
General:
Interfaces: IEEE488.2, RS-232, USB device and Ethernet.
USB flash: Front-panel slot for USB flash storage of screen shots and data
Preamp power: 9-pin D connector to power SRS preamps
Power: 60 W, 100/120/220/240 VAC, 50/60 Hz
Dimensions: 17" × 5.25" × 17" (WHL)
Weight: 22 lbs.
