Senseca UM3K-025GM180 Flow Switch (14.0 - 18.0 l/min, DN 25, brass construction)

Switch: micro switch

Nominal width: DN 25

Process connections: female thread G 1 (further process connections available on request)

Switching range: 14.0 - 18.0 l/min

Qmax.: 60 l/min

Tolerance: ±15 % of full scale value

Pressure rating: PN 25

Medium temperature: -20..+ 110°C

Ambient temperature: -20..+70 °C

Media: water (oils, gases and aggressive media available on request)

Materials medium-contact

Brass construction: CW617N nickelled, CW614N nickelled, 1.4310, 1.4301, hard ferrite, NBR

Non-medium contact materials: ABS, PA, NBR

Weight: see table "Dimensions and weights"

Installation location

Standard: horizontal inwards flow; switching unit not recommended underneath; other installation positions are possible; the installation position affects the switching point and switch range

Switching voltage: max. 250 V AC

Switching current: max. 5 A

Protection class: 2 - safety insulation

Ingress protection: IP 65

Electrical connection: plug DIN 43650-A / ISO 4400, optionally for round plug connector M12x1, 4-pole

Datasheet