Senseca HR2K1-032GM150 Flow Switch (25 -150 l/min, DN 32, process connection: brass)

No mechanical display

Switch: reed switch

Nominal width: DN 32

Process connection: female thread G 1 1/4

Switching range: 25 -150 l/min

Pressure loss: ~1 bar at Qmax

Qmax.: to 300 l/min

Tolerance: ±10 % of full scale value

Pressure resistance: PS 200 bar

Media temperature: -20..+120 ℃

Ambient temperature: -20..+70 °C

Media: water

Switching voltage: Max. 250 V AC

Switching current: Max. 1.5A

Switching capacity: Max. 50 VA

Protection: class 2 - safety insulation

Ingress protection: IP 65

Electrical connection: plug DIN 43650-A / ISO 44000, optionally round plug connector M12x1, 4-pole

Materials medium-contact

Brass construction: CW614N nickelled, CW614N, 1.4305, 1.4310, hard ferrite

Non-medium contact materials: CW614N nickelled, PC, PA, NBR, 1.4301, CW508L nickelled,

Installation location

Standard: horizontal inwards flow from the left; other installation positions are possible; the installation position affects the switching point and range.

For details please see Datasheet

Datasheet