Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Measuring Range: 2.0 – 500.0 cN
Resolution: 0.1 cN
Measuring Head Width*: 22 mm
SCHMIDT Calibration Material**: PA: 0.20 mm Ø
Calibration: According SCHMIDT factory procedure
Accuracy: ±1 % full scale ±1 digit or better (typical ±0.5 % full scale)
Measuring units: cN, g, N or lb, switchable
Overrange: Approx. 10 % full scale, without accuracy guarantee
Overload protection: 200 % full scale
Measuring principle: Strain gauge bridge
Measuring roller deflection: Max. 0.5 mm
Signal processing: Digital
Damping: Adjustable electronic damping, averaging
Sampling rate internal: approx. 1 kHz
Sampling rate: 200 Hz, 2 Hz: AVG, MIN, MAX
Display: Colour-TFT 128 x 160
Display update rate: Approx. 2 times per second
Memory: Last, average, MAX and MIN
Temperature coefficient: Gain: less than ± 0.01% full scale/°C
Temperature range: 10 – 45 ºC
Air humidity: 85 % RH, max.
Auto power off: Approx. after 3 minutes of non-use
Power supply: LiPo accumulator (approx. 20 h continuous use, charging time approx. 3.5 h), USB AC adapter 100 – 240 V AC with 4 adapters (EU/USA/UK/AUS-NZ)
Housing material: Aluminium
Dimensions: See dimensions
Weight, net (gross): Approx. 310 g (1220 g)
Additional specifications of model ETX USB
Output signal: USB
Memory: Max. 60000 at 999 measuring periods
Memory Modes: 5 memory modes with statistical evaluation and PEAK capture
* Outer distance between outside guide rollers
** Suitable for 95 % of applications – PA = Polyamid-Monofile, calibrated with a running filament approx. 60 m/min
Delivery Includes: carrying case, USB AC adapter with 4 adapters (EU/USA/UK/AUS-NZ), USB cable, a screwdriver and flat wrench, operating instruction in German or English (as requested), Certificate of Compliance with the order 2.1 according EN 10204 free of charge. Tension meter ETX includes additionally software »Tension Inspect 3«
