Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
100MHz BANDWIDTH.
20MHz LIMIT.
1mV SENSITIVITY.
2.0nS RESOLUTION.
CE. TUV GS, UL, CUL, IEC1010
CRT
| Type : | Rectangular with integral graticule. |
| Display Area : | 8 x 10 div ( 1 div = 1 cm ) |
| Accelerating Voltage : | 14 kV. |
| Phosphor : | P31. |
|
VERTICAL AMPLIFIERS ( CH 1 and CH 2 ) |
|
| Sensitivity : |
5 mV / div to 5 V / div ( X1 mode ). |
| Accuracy : | ± 3 % ( X1 mode ). ± 5 % ( X5 mode ). |
| Input Resistance: | 1 MΩ ± 2 % |
| Input Capacitance: | 25 pF ± 10 pF. |
|
Frequency Response: |
|
| 5 mV to 5 V / div ( CAL ): | DC to 25 MHz (-3 dB). |
| 1 mV / div (CAL): | 5mV/div~5V/div: DC~50MHz(-3db) |
| Rise Time: | Approximately 3.5 ns. |
| Operaing Modes: | |
| CH1: | CH 1, single trace. | |
| CH2: | CH 2, single trace. | |
| ALT: | Dual trace, alternating. | |
| CHOP: | dual trace, chopped. | |
| ADD: | algebraic sum of CH 1 + CH 2. | |
| Polarity Reversal (Invert): | CH 2 only. | |
| Maximum Input Voltae: | 400 V dc + ac peak. | |
|
Maximum Undistorted Amplitude: |
||
| DC-to-120 MHz: | 4 divisions. | |
| DC-to-60 MHz: | 8 divisions. | |
|
HORIZONTAL AMPLIFIER ( Input through channel 1 input ) |
||
| X-Y mode: | switch selectable using X-Y switch. | |
| CH 1: | X axis. | |
| CH 2: | Y axis. | |
| Sensitivity: | 1mV/DIV - 5V/DIV | |
|
Accuracy: |
||
| Y-Axis: | ± 3%. | |
| X-Axis: | ± 6%. | |
| Input Impedance: |
1MΩ //25PF |
|
| Frequency Response: | DC to 1 MHz typical ( -3 dB ). | |
| X-Y Phase Difference: | Approximately 3° at 50 kHz. | |
| Maximum Input Voltage: | 400V dc+ac pack | |
|
SWEEP SYSTEM |
||
| Sweep Speed: | 20 ns/div to 0.5 s/div in 1-2-5 sequence, 23 steps.Vernier control porvides fully adjustable sweep time between steps. |
|
| Accuracy: | ± 3 %. | |
| Sweep Magnification: | 10X, ± 10% extend sweep speed up tp 2 ns/div. |
|
| Holdoff: | Continuously adjustable from NORM to 5 times normal. | |
|
TRIGGERING |
||
| Trigger Modes: | AUTO ( free run ) or NORM. | |
| Trigger Source: | CH1, CH2, ALT, EXT, LINE. | |
|
Maximum External Trigger Voltage: |
300 V dc + ac peak. | |
|
Trigger Coupling: |
||
| AUTO ( AC ): | 30 Hz to 120 MHz. | |
| TV-H ( AC ): | Used for triggering from horizontal sync pulses. | |
| TV-V ( DC ): | Used for triggering from vertical sync pulses. | |
| Trigger Sensitivity: | ||
| Internal: | 1.0 division. | |
| External: | 200 mV. | |
|
OTHER SPECIFICATIONS |
||
| Calibrating Voltage: | 1 kHz ( nominal ) Positive Square Wave, 0.5 V p-p ( ± 3% ) | |
| Trace Rotage: | Electrical, front panel adjustable. | |
| Power Requirements: | 115/230 VAC ± 10%, 50/60Hz,? approximately 60 W. |
|
| Dimensions: | 324 x 132 x 398 mm ( 12.8 x 5.2 x 15.6" ). | |
| Weight: | Approximately 8.5 kg ( 18.7 1bs ). | |
| C E STANDARD: | E.M.C. Regulations-1992 )E.C. Directive 89/336/EEC)EN 50081-1 Emissions. EN 50082-1 Immunity. |
|