Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Shock: 50 g, 11 ms half-sine
Weight: 200 g
Accuracy: ± 0.08 %
Bandwidth: DC to 1 kHz
Stability: ± 0.1%
Vibration: 5-2000-5 Hz, 30 minute cycle,Curve L, Mil-Spec 810 figure 514-2-2, vertical and horizontal axis
Cable Length: 2 m
Accuracy Note: 0.08% BSL linearity, hysteresis and repeatability combined Thermal Accuracy: ± 0.50%(Span &Zero)
Output Signal: Current
Pressure Type: Differential
Pressure, Max: 70 mBar
Pressure, Min: 0 mBar
Response Time: <1 ms
Accuracy Class: < 0.1%
Stability Note: Long Term Stability (1-Year): ± 0.1% FS typical
Supply Voltage: 9 to 30 Vdc
Pressure Cycles: 1 million, minimum
Electrical Output: 4 to 20 mA
Materials, Wetted: 316L Stainless Steel
Zero/Balance Error: ± 0.5%
Media Compatibility: Air, Alkaline solutions, Any, Argon, Carbon dioxide, Dilute Acids, Gases, Helium, Hydraulic Oil, Hydrogen, Light Oil, Liquids, Nitrogen, Non-corrosive Dry Gasses, Oil, Oxygen, Solvents, Steam, Water, Water-based fluids
Line/Static Pressure: 500 psi max
Loop Resistance, Max: (Vs-9) x 50 Ω
Additional Features 1: Wet/Wet Diff
Electrical Connection: M12 4 pin Female
Insulation Resistance: 100 MΩ
Process Connection Size: 1/4 in
Process Connection Type: BSPP Male
Zero/Balance Error Note: ± 0.5% typical (1% maximum)
Operating Temperature, Max: 115 °C
Operating Temperature, Min: -45 °C
Span Setting Adjustable Range: ± 0.5% typical (1% maximum)
Positive Side differential wetted materials: 316L stainless steel
Negative Side differentional compatable fluids or gasses: Same as positive side
