Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
APP: NFC Programming via APP Direct Link for Android smartphones
Width: 48 mm
Height: 48 mm
Length: 105 mm
Tuning: Autotune, Manual
Weight: 185 g
Accuracy: ± 15 %
Input Type: Thermocouple, RTD, Thermistor, mA, mV, Digital I/O, Current Transformer
Soft-Start: Rising gradient expressed as Degrees / Hour or fixed output percentage
Alarm modes: Absolute or Threshold, Adjustable, Band, High, High/Low, Loop Break Alarm, Low, Manual reset
Form factor: 1/16 DIN
Display Type: 4 Digit LED
Double P.I.D: Heating / Cooling P.I.D
Output Detail: 3 Relays, 2 SSRs, 2 Analog;2/3 Relays Outputs : Relay 2 A - 250 V AC resistive change 2 SSR Outputs : 12 / 24 V DC - 30 mA max 1/2 Analog : Selection 4 to 20 mA (40000 points ± 0,2% F.S.) or 0 to 10 VDC (40000 points ± 0,2% F.S.) for command or retransmission PV / SPV
Output Signal: Current, Voltage
Sampling Rate: 470 Hz (470 updates/second)
Control Output: 2 SSR Relay, SPDT Relay, 2 SPST Relay, 2 Analogue Output
Data Interface: RS485 Modbus
Supply Voltage: 24 Vac/Vdc
Data protection: Access by password, Alarm setpoint, Lock of control
Measurement Type: Current, Resistance, Temperature, Voltage
Number of Inputs: 2
Open/Close logic: Open / Close logic for motorized valves
Display Type Note: 4 digits 0.5” white + 4 digits 0.3” red
Enclosure Ratings: IP20, IP65
Relative Humidity: 35 to 95 RH%
Supply Power Note: 50/60 Hz
Supply Power Type: DC
Control Algorithms: On/Off Control, PID Control
Enclosure Material: Polycarbonate
Galvanic Isolation: 2.5 KV
Sampling Rate Note: Programmable up to 2.1 ms (frequency up to 470 Hz)
Auto/Manual function: Output percentage command also with automatic change in case of sensor failure
Quick Set-up Options: Memory Card, software LABSOFTVIEW, or EASY-UP
Additional Features 1: NFC & 2/4 Digital Inputs, CT Input
Programmable Functions: Pre-programmed cycle
Current Transformer Input: Selection One C.T. 50 mA, 800 μs - 4096 points
Number of Control Outputs: 7
Operating Temperature, Max: 45 °C
Operating Temperature, Min: 0 °C
