Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Volume: 49 liters
Interior dimension: 385W x 385H x 330D mm
Exterior dimension: 550W x 687H x 480D mm
Max. number of thermoshelves: 2
Max. number of thermoshelves (with premium module): 4
Temperature measured through 4-wire Pt100 sensor individually for each thermoshelf
Working temperature range: min. 5°C above ambient up to 200°C
Setting accuracy temperature: 0.1°C for setpoint and actual value
Temperature variation in time (to DIN 12880:2007-05): ≤ ± 0.3 K
Temperature uniformity (surface) at 1600C/20 mbar: ≤ ± 2 K
Vaccum range: 5 – 1100 mbar
Pressure control: digital electronic pressure control for a speed-controlled vacuum pump. Tubing for vacuum, air and inert gas are made of material 1.4571 (ASTM 316 Ti). Programmable, digitally controlled inlet for air.
Permitted final vacuum: 0.01 mbar
Maximum leckage rate: 0.01 bar/h
Pump control: speed control, optimised rinsing procedures for the pump membrances as well as signal output for pump ON/OFF
Connection: vacuum connection with small flange DN16, and gas inlet with small flange DN16
Adjustable parameters: temperature (Celsius or Fahrenheit), pressure (vacuum), programme time, time zones
Language setting: German, English, Spanish, French, Polish, Czech, Hungarian, Italian
ControlCOCKPIT: TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays
Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT: the process time does not start unitil the set temperature is reached
Interface: Ethernet LAN, USB
Programme stored in case of power failure
Programming: AtmoCONTROL sofware on a USB stick for programming, managing and transfering programmes via Ethernet interface or USB port
Temperature control: mechanical temperature limiter TB, protection class according to DIN 12880 to switch off the heating approx. 10°C above norminal temperature
AutoSAFETY: additionally integrated over-and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature, compressor in case of undertemperature
Alarm: visual and acoustic
Fuzzy-supported MLC (Multi-Level-Controlling) microprocessor controller adapting its performance to the volume (local temperature sensing) for each thermoshelf
Thermo shelves: 2 connections for thermoshelves in the rear (1st and 3rd level)
Material: hermetically welded stainless steel interior of extremely corrosion-resistant stainless steel, material 1.4404
Door: full-sight glass door, inside spring-loaded, 15 mm thick glazed panel in safety glass, outside with anti-splitter screen
Housing: rear zinc-plated steel
Ambient temperature: 5 – 40°C
Humidity: max. 80% RH, non-condensing
Voltage: 230 V, 50/60 Hz
Electrical load: approx. 1020 W
Accessories:
+ Calibration certificate for 160°C at 20 mbar pressure for each supplied thermoshelf together with the vacuum oven (Memmert supply)
+ 1 thermoshelf of aluminim, material 3.3547 (ASTM B209) with integrated large-area heating
+ Vacuum pump PMP
+ Manual
