Live Webinar: Speed Up Your Production Test in Industrial 4.0

Many semiconductor and electronic device tests involve sourcing a voltage and measuring a current as quickly as possible.

Many semiconductor and electronic device tests involve sourcing a voltage and measuring a current as quickly as possible. Overall test time is a function of charge time, measure time, and discharge time, as well as the time to setup and process the test.

When a typical test program executes from a PC controller, it continually communicates back and forth with the test instrumentation. This communication time, whether it is over GPIB, LAN, USB, or some other protocol, is often one of the largest contributors to slower test times. Embedded test scripts minimize this communication time by storing and then executing entire test programs directly from the instrument’s non-volatile memory. All setup, decision-making, and data storage is now done from inside the instrument itself, independent of the PC.

Join us to learn about, what is a SMU and TSP. Experience the speed and power of the Keithley SMU and TSP, helping you in the new world of Industrial 4.0

DATE: 2/9/2020, Wed

TIME: 2:00 PM (GMT+8)

Related News

06/15/2026 15:03:42

How do Rockwell, Brinell, and Vickers hardness differ? How to choose the right hardness testing method

Rockwell, Brinell, and Vickers are three of the most common hardness testing methods currently used. Learn about the differences in measurement principles, application ranges, and how to choose the right method for each type of material.

06/15/2026 14:30:32

How do HRC, HRB, and HRA scales differ in hardness testing?

HRC, HRB, and HRA all belong to the Rockwell hardness system but are applied to different material groups. Understanding the differences between HRC, HRB, and HRA helps in selecting the correct testing method, accurately reading specifications, and avoiding unnecessary errors in material quality assessment.

06/13/2026 08:40:47

How to Convert RPM to RCF? Formulas and Easy-to-Understand Examples

A guide to accurately converting RPM to RCF. Learn the difference between RPM and RCF, the calculation formulas, practical examples, and why you shouldn't rely solely on RPM when using a centrifuge

06/12/2026 14:26:27

What is the required TDS level for shrimp ponds?

What is the ideal TDS level for a shrimp tank? Many people spend a lot of time monitoring pH, temperature, and filtration systems but overlook TDS. Only when shrimp grow slowly, their colors fade, they have difficulty molting, or die off sporadically do they start checking their water source and discover that this indicator has long been out of the right range

06/12/2026 11:43:51

Signs that the electrodes in your TDS meter are degraded and need replacing

TDS meters can operate reliably for many years, but the electrodes are the most subject to wear and tear. Each time a measurement is taken, the sensor surface comes into direct contact with water, dissolved minerals, and various other chemical components. This continuous process means the electrode's responsiveness gradually decreases over time.