Temperature Range (℃ / ℉) Amb. to 350 / 662
Speed Range (RPM) 50 to 2,000
Heating Power (W) : 800
motor BLDC motor
Hot Top Indicator (℃ / ℉) Warning lamp (50 / 122)
Over Temp. Top plate Main body PCB
Over Current Current limit protection
Timer 2 type, 1min to 99 hrs 59 min
Load, Max (kg / Ibs) 25 / 55.1
Material Ceramic coated aluminum
Dimension (WxDxH, mm / Inch) 240x324x100 mm
Electrical Requirements (230V,50Hz / 60Hz) 4A
Heating Bath

transparent safety shield

Clamp Holder (C-10,C-7,C-5)

Support rods

Operating Features
- Hot Top Warning Indicator on the control panel will blink whenever the top plate temperature is over 50℃ to prevent accidental injuries.
- Overheat prevention circuit turns off the heater if the top plate temperature reaches 450℃ for any reason.
- Virtually no decoupling of magnetic stir bars even with viscous media or at high speeds.
- Temperature limit can be set between 50 and 350℃.
- Thanks to the built-in BLDC motor, stirring action stops instantly when the stirrer is turned off.
Constructional Features
- Integrated design of the heater and the top plate provides exceptional heat transfer rate and quick heat up capability.
- Fast and precise stirring operations even at high temperatures are enabled by the BLDC motor and a powerful magnet.
- Non-slip heating bath with concavo-convex bottom prevents unintentional slips of the bath.
(included for Advanced Models and optional for Basic Models)
- A transparent safety shield protects users from liquid splashes or de-coupled stir bars during operations.
(included for Advanced Models and optional for Basic Models)
- Two support rods allow for diverse flexibility in configuring other test equipments and accessories.
(included for Advanced Models and optional for Basic Models)
| Model 1) |
TM-14SB |
TM-14RB |
TM-17SB |
TM-17RB |
| Technical Data |
Heating |
Temperature Range (℃ / ℉) |
Amb. to 350 / 662 |
| Control |
Scale |
| Heating Power (W) |
600 |
800 |
| Stirring |
Speed Range (RPM) |
50 to 2,000 |
| Capacity (L / cu ft, H2O) |
20 / 0.71 |
| Magnetic Bar, Max. (ØxL, mm / Inch) |
8 x 40 / 0.31 x 1.57 |
| Safety |
Hot Top Indicator (℃ / ℉) |
Warning lamp (50 / 122) |
| Over Temp. |
Top plate Main body PCB |
| Over Current |
Current limit protection |
| Motor |
BLDC motor |
| Load, Max (kg / Ibs) |
25 / 55.12 |
| General Data |
Top plate |
Material |
Ceramic coated aluminum |
| Dimension (Ø, mm / Inch) |
140 / 5.51 |
170 / 6.69 |
| Body |
Material |
Cast aluminum |
| Dimension (WxDxH, mm / Inch) |
161x290x100 / 6.34x11.42x3.94 |
210x294x99 / 8.27x11.57x3.9 |
191x330x101 / 7.52x12.99x3.98 |
240x324x100 / 9.45x12.76x3.94 |
| Net Weight (kg / Ibs) |
2.8 / 6.17 |
3 / 6.61 |
3.5 / 7.72 |
3.6 / 7.94 |
| Electrical Requirements (230V,50Hz/60Hz) |
3 A |
4 A |
| Cat. No. |
AAH34215K |
AAH34315K |
AAH34225K |
AAH34325K |
| Electrical Requirements (120V,60Hz) |
5A |
6.7A |
| Cat. No. |
AAH34213U |
AAH34313U |
AAH34223U |
AAH34323U |
1) S / SB Models: straight type, R/RB Models: round type with handles.
※ Permissible environmental conditions: temperature (5-40℃) and relative humidity (up to 80%).
※ Above specifications can be changed without prior notice.