HINOTEK Bante901P Portable Ph/Conductivity Meter (-2.000~20.000pH, ± 1999.9mV)

pH:

Measuring range: -2.000~20.000pH

Display resolution: 0.001, 0.01, 0.1pH, optional

Measurement accuracy: ± 0.002pH

Calibration point: 1 to 5 points

pH buffer options: USA, NIST, DIN, 2 custom buffers

mV:

Measuring range: ± 1999.9mV

Display resolution: 0.1, 1mV, optional

Measurement accuracy: ± 0.2mV

Conductivity:

Measuring range: 0.01~20.00, 200.0, 2000µS/cm, 20.00, 200.0mS/cm

Display resolution: 0.001, 0.01, 0.1, 1

Measurement accuracy: ± 0.5% FS

Calibration point: 1 to 5 points

Calibration solution: 10µS, 84µS, 1413µS, 12.88mS, 111.8mS

Temperature compensation coefficient: Linear (0.0~10.0%/ ° C), pure water

Reference temperature: 20/25 ° C

Conductivity cell constant: K=0.1, 1, 10, custom

TDS:

Measuring range: 0.00~10.00, 100.0, 1000ppm, 10.00, 200.0ppt

Display resolution: 0.01, 0.1, 1

Measurement accuracy: ± 1% FS

TDS conversion factor: 0.1~1.0 ( default 0.5)

Temperature:

Measuring range: 0~105°C/32~221°F

Display resolution: 0.1°C/0.1°F

Measurement accuracy: ±0.5°C/±0.9°F

Offset calibration: 1 point, measured value ±10°C

General parameters:

Temperature compensation range: 0~100°C/32~212°F, manual or automatic

Data storage: 500 groups

Communication output: USB

Connector: BNC, 6-pin DIN, 3.5mm microphone jack

Display screen: Custom LCD display (80×60mm)

Power type: 3 AA batteries or DC5V power adapter

Dimensions: 170(L)×85(W)×30(H)mm

Meter weight: 300g

Datasheet

Manual