Name: Elcometer CG100ABDL Corrosion Thickness Gauges (0.01~508mm, A-scan, B-scan, Thrupaint, Datalogging)
Brand: ELCOMETER

Stay Updated with Offers

Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.

By subscribing, you agree to our Terms of Service and Privacy Policy.

Quick Support

Direct access to our certified experts

With a wide selection of display and measurement modes, automatic gain control and data-logging, the CG100 range of corrosion thickness gauges is ideal for measuring coating and material thickness as well as for locating pits, flaws and defects in materials.

The Elcometer CG100 ultrasonic corrosion thickness gauge is available in four models - from an entry level CG100B to the top of the range CG100ABDL+.

Features:

Range of display & measurement options: Pulse-Echo, Echo-Echo, Pulse-Echo Temp, Comp Mode (PETP), Coating Only Mode (CT), Pulse-Echo Coating Mode (PECT)
Adjustable gain: -30dB to 70dB range
Automatic gain control (AGC)
Time corrected gain (TCG)
Gate control
Threshold adjustment
64 User defined setups
Multiple language display
Multiple calibration and material selection options
High speed scan mode: 32 readings per second
Differential and minimal thickness alarm modes
Data output and storage: 16,000 readings and waveforms or B-Scans
Download to ElcoMaster^® data management software

Technical Specification

Model & Part Number

CG100B

CG100BDL

CG100ABDL

CG100ABDL+

Material thickness digits display

■

B-Scan cross sectional display

■

Combined B-Scan and digits display

■

Scan bar display

■

Coating thickness display

■

A-Scan Display

+ Rectified, - Rectified,
Full Waveform (RF)

Measurement Mode

PE, PETP (Temp Compensation),
EE (ThruPaint™), EEV,
CT (Coating) & PECT

Measurement Rate
Manual:
Scan mode
Scan bar display

4 readings per second
50 readings per second
6 readings per second

4 readings per second
32 readings per second
6 readings per second

Measuring Range

PE: 0.63 - 508mm
(0.025 - 19.999 inches)
PETP: 0.63 - 508mm
(0.025 - 19.999 inches)
EE: 1.27 - 102mm
(0.050 - 4.000 inches)
EEV: 1.27 - 25.4mm
(0.050 - 1.000 inches)
CT: 0.01 - 2.54mm
(0.001 - 0.100 inches)
PECT: 0.63 - 508mm
(0.025 - 19.999 inches)
PECT: 0.01 - 2.54mm
(0.001 - 0.100 inches)

PE: 0.63 - 508mm
(0.025 - 19.999 inches)
PETP: 0.63 - 508mm
(0.025 - 19.999 inches)
EE: 1.27 - 102mm
(0.050 - 4.000 inches)
EEV: 1.27 - 25.4mm
(0.050 - 1.000 inch)
CT: 0.01 - 2.54mm
(0.001 - 0.100 inches)
PECT: 0.63 - 508mm
(0.025 - 19.999 inches)
PECT: 0.01 - 2.54mm
(0.0005 - 0.100 inch)

Measurement Accuracy

± 1% or ±0.1mm
whichever is the greater

Measurement Resolution

0.01mm (0.001 inches)

Velocity Calibration Range

1250 - 13,995m/s
(0.0492 - 0.5510in/ms)

Additional Features:
High speed scan mode

■

Differential mode

■

Limit alarm mode

■

B-Scan display speed

15 seconds per screen

Adjustable display speed

Flaw mode

Basic prove-up flaw detection using single element angle beam transducers

Calibration setups

6 factory & 64 user-definable setups transferrable to and from a PC archive

Gates

3 fully adjustable gates: start, stop, width & threshold

Damping

Adjustable; impedance matching for optimising transducer performance

Pulser type

Dual square wave pulsers up to 140Hz pulse repetition rate

Dual 200 volt square wave pulsers with adjustable pulse width(spike, thin, wide) and 50 volt cut/boost for greater penetration

Dual 200 volt square wave pulsers with adjustable pulse width
(spike, thin, wide) and 50 volt cut/boost for greater penetration

Gain

Automatic gain control (AGC) with 110dB range (limited), or selectable gain: vlow, low, medium hi or vhi

Manual, automatic gain control (AGC) with 110dB range (limited)

Timing

Precision 25MHz TCXO with single shot 100MHz 8bit ultra low power 8 bit digitizer

Data logging

16,000 with B-scan image & gauge settings
210,000 - coating, material, min, max thickness
sequential and grid logging
Alpha numeric batch identification
OBSTRUCT indicates inaccessible locations

16,000 with B-scan image & gauge settings
210,000 - coating, material, min, max thickness
sequential and grid logging
Alpha numeric batch identification
OBSTRUCT indicates inaccessible locations

8,000 with A/B-scan image & gauge settings
210,000 - coating, material, min, max thickness
sequential and grid logging
Alpha numeric batch identification
OBSTRUCT indicates inaccessible locations

Calibration Options

Single, two point, velocity & material type

Transducer Probe Type

Dual element

Dual element & flaw prove up

Transducer Frequency Range

1 - 10MHz

Transducer recognition

Automatic & manual - selectable from a list

V-path / dual path error correction

Automatic

Probe zero

Automatic & manual (via integrated probe disk)

Display

1/8 VGA (grayscale)
62 x 45.7mm
(2.4 x 1.8 inches)
viewable area

1/4 VGA AMOLED colour display
57.6 x 43.2mm
(2.27 x 1.78inch)
viewable area

Display Refresh Rate

25Hz

120Hz

Units (selectable)

mm or inches

Backlight

on / off / auto

adjustable brightness

Repeatability / Stability Indicator

■

Battery Type

3 x AA alkaline

Battery Life (approximate)

150 hours

50 hours

25 hours

Low Battery Indicator

■

Battery Save Mode

auto

Operating Temperature

-10 to 60ºC (14 to 140ºF)

Size (w x h x d)

Elcometer CG100ABDL Corrosion Thickness Gauges (0.01~508mm, A-scan, B-scan, Thrupaint, Datalogging)

CG100 Corrosion Thickness Gauges

With a wide selection of display and measurement modes, automatic gain control and data-logging, the CG100 range of corrosion thickness gauges is ideal for measuring coating and material thickness as well as for locating pits, flaws and defects in materials.

CG100 Corrosion Thickness Gauges

Technical Specification

Related Products

Related Products