Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Measured value: Temperature, Relative humidity, Two-state signal
Temperature sensor:
Measuring range: -55 to +105 °C
Accuracy: according to the connected probe DSxx
Resolution: 0.1 °C
Humidity sensor:
Measuring range: according to the connected probe DSxx
Accuracy: according to the connected probe DSxx
Resolution: 0.1% RH
Flood detector:
Usage Intended: for indoor usage only
Cable length: 2.5 meters (can`t be extended)
Two wire connection: red wire – active, black wire – GND, directly powered from P8653
Binary input:
Parameters of the voltage contact Voltage input level for „L“:< 1,0 V;
Voltage input level for „H“: > 2,5 V;
Internal resistivity of the voltage source: < 2kOhm
Input voltage range: 0 to +30 V
Parameters of the voltage-free contact: Voltage on the unclosed contact: 3,3 V
Current through closed contact: 0,1 mA
Maximum resistivity of the contact: < 5kOhm
Operating temperature: -20 to +60 °C
Channels: 1x external temperature probe nebo 1x connectable temperature+humidity probe
Output: Ethernet
Measuring interval: 2 s
Available temperature units: degrees Celsius, degrees Fahrenheit
Communication protocol: WWW, ModbusTCP, SNMPv1, SOAP, XML
Alarm protocols: E-mail, SNMP Trap, Syslog
Power: Power over Ethernet according to IEEE 802.3af or 5Vdc
Protection class: IP30
Dimensions: 88 x 74 x 39,5 mm
Weight: approx. 125 g
Included in delivery:
P8653
Instruction Manual
Traceable Calibration Certificate
FREE software TSensor for Configuring of the Transmitter
COMET Cloud for 3 Months
Flood detector LD-81
EXTERNAL PROBES ARE NOT INCLUDED IN DELIVERY
