Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Measure range: 0~10/100/1000ppm/1%/25.00% O2
Accuracy:
0.01~9.99ppm O2:±5% FS
10.0~99.9ppm O2:±3% FS
100~1000ppm O2:±2% FS
Repeatability:
0.01~9.99ppm O2:±2.5% FS
10.0~99.9ppm O2:±1.5% FS
100~1000ppm O2:±1% FS
Stability:
0.01~9.99ppm O2:±2.5% FS/7d
10.0~99.9ppm O2:±1.5% FS/7d
100~1000ppm O2:±1% FS/7d
Response time: T90<60s(25°C)
Sensor: Fuel cell oxygen sensor
Power supply: 85~264VAC,50/60Hz
Environment temperature: -10~50°C,Environment Humidity:<80%RH
Communication: RS485(standard)/RS232(optional)
Switch output: 2 sets,(One group of state alarm and one group of concentration alarm)
Relay contact point capacity: 24V DC,0.2A
Analog output: 1 set,4-20mA/0-20mA/0-1V/0-5V/0-10V/1-5V (You can set the mode freely).
The load: less than 500 Ω
External control: 1 set, control signal 9~28VDC
Sample gas pressure: atmospheric conditions±10% (Gas outlet should be atmospheric conditions)
Sample flow rate: 1.5~2L/min
Analyzer size: L×W×H=310mm×275mm×190mm
