Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
GENERAL
Operating Applications: General weighing, general weighing with accumulation, checkweighing, counting, peak measurement, batching and remote display
Calibration: Two to five points stored
Analog To Digital Measurement Rate: 80 Hz
Unit Of Measure: Two, configurable (pounds, kilograms, ounce, gram, pound/ounce, custom)
Capacity Selections: 9,999,999 with decimal located zero to five places
Incremental Selections: Multiples and sub-multiples of 1, 2, 5
Programmable Selections: Zero range, motion detection, automatic zero tracking, five point linearization
Time And Date: Battery backed up time/date/year (12 hr or 24 hour format)
Internal Resolution: 53,687,100 counts per mV/V per second
Digital Filtering: Harmonizer filtering with adaptable constant and threshold
Self Diagnostics: Display, keys, inputs, outputs, serial port
ELECTRICAL
Power Requirements: Line voltage: 90 VAC to 264 VAC (110-240 VAC nominal), frequency 50 or 60 Hz, 12 to 36 VDC
Power consumption: estimated at 150 mA at 12 VDC for one weight sensor and
180 mA at 12 VDC for four weight sensors
Excitation:
5 VDC, short circuit protected
Supports up to four 350 ohm weight sensors
4 or 6 conductors with sense leads
Detachable plug connectors
Analog Signal Input Range: -1 m/V/V to 5 mV/V
Analog Signal Sensitivity:
0.1 µV/V/divisions minimum
0.5 µV/V/divisions recommended
USER INTERFACE
Operational Keys: Tare, Select, Zero, Print, Units, F1, On/Off (no keys on signal processor)
Status Annunciators: Center of Zero, Motion, Gross, Net, Tare, Count, Print, Battery Status, Setpoint 1, Setpoint 2, Setpoint 3,
Over/Under/Accept bar graph or fill bar graph, lb, kg, Preset Tare, Total,
(Custom unit of measure– lb/oz, ton, gram, configurable), Active Ethernet connection
Keypad: 7 key chemical resistant polycarbonate
Display ABS: TN backlit 7-digit seven segment display with 1.2 in / 30 mm high digits
Stainless steel: TN backlit 7-digit seven segment display with 0.5 in / 13 mm high digits
Panel mount: TN backlit 7-digit seven segment display with 0.5 in / 13 mm high digits
Signal processor: No display
Displays have annunciators for status and mode identification
Display Rate Selectable (1, 2, 5, 10) times per second
INPUT/OUTPUT
Remote Inputs: Three logic level inputs for Zero, Print, Tare, Units, or Select
Standard Outputs: Three set point outputs, open collector design
Communications:
Two serial ports:
- Comm 1 RS232, no handshaking
- Comm 2 RS232, no handshaking
Ethernet: TCP/IP, DHCP, Static IP
Protocols (all ports):
- SMA Broadcast, Remote Display, and NCI
ZM201 Signal Processor Modbus/TCP
Circuitry Protection RFI, EMI and ESD protection
PHYSICAL
Operating Temperature: Compliance with legal-for-trade requirements Approval: 14° to 104° F / -10° to 40° C at 10 to 90% relative humidity, non-condensing
Industrial: -4° to 140° F / -20° to 60° C at 10 to 90% relative humidity, non-condensing
Enclosure: Stainless steel: 304 brushed stainless steel IP66 with tilt stand/ mounting bracket
Plastic: ABS plastic IP20 with rubber feet
Panel mount: Stainless steel panel mount IP66