AMETEK CTS NetWave 20 Electronic Power Source (22.5 kVA; 300 V/520 V; 27 kW; ±425 V, ±850 VDC)

Output Power AC: 22.5 kVA

Output Voltage AC: 300 V (L-N) / 520 V (L-L)

Output Current AC max.: 26 A cont. per line (at 300 V), 47 A for 3 s, 200 A repetitive peak, max. 78 A (Opt-3 Parallel)

Output Power DC: 27 kW

Output Voltage DC max.: ±425 V, ±850 VDC (Opt-3 DC-EVR)

Output Current DC max.: 26 A cont. (at 360 V), 47 A for 3 s, 200 A repetitive peak, max. 78 A (Opt-3 Parallel)

Number of Lines: 3

Frequency range: Large signal: 0 - 5 kHz, small signal: up to 35 kHz

Ripple: <50 V: 110 mV; >50 V: <110 mVrms + 0.02% of set value

THD @ 50/60Hz, max.: 0.5 %

Voltage Accuracy: DC: ±0.2 % of set value ±0.15 % of full scale, AC: add ±0.1 % of set frequency /1000

Phase Resolution 1 °

Frequency Accuracy: 100 ppm

Slew Rate max.: 8000 V/ms

Compensation / Sense: internal / external sense, max. compensation 15%

Display and Controls: 2-Line LCD display, LED indicators, operating keys

Signal Generator: Integrated, 3 channels, 16 bit, 50 kSa/s per channel, min. 60 GB memory on hard disk

Protection: Over current, over voltage, over temperature, low voltage, current limiter

Trigger Modes: Input: 2x trigger, 2x DUT monitor; Output: 2x Trigger

Output Connectors: CEE 32A/690V, 6 mm lab plugs

AC Supply:

-208: 3 x 208 V, 100 A cont. / 180 A for 3 s, per phase

-400: 3 x 400 V, 50 A cont. / 90 A for 3 s, per phase

-480: 3 x 480 V, 42 A cont. / 75 A for 3s, per phase

3PH + PE (no neutral)

45 - 65 Hz

Supply Connector: Screw Terminal

Dimensions:

1785 x 930 x 755 mm

1785 x 1210 x 755 mm with recovery option

Net Weight:

740 kg

810 kg with recovery option

Operating Environment: 5°C - 35°C, 10% - 90% non-condensing, 86 kPa (860 mbar) to 106 kPa (1 060 mbar)

Datasheet