Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Input
Input Voltage and Frequency1: 90 to 264 VAC, 47 to 63 Hz, 1Ø; 127 to 370 VDC
Input Current: 19.7 A @ 115 VAC, 14.5 A @ 230 VAC
Inrush Current: 33 A/115 VAC, 65 A/230 VAC
Efficiency: 93%
Power Factor: 0.95/230 VAC, 0.98/115 VAC at full load
Leakage Current: <3.5 mA/240 VAC
Output.
Output Volts: 60V
Rated Current: 50A
Current Range: 0-50 A
Output Power: 3000W
Ripple & Noise2: 600 mV pk-pk
Line Regulation: ± 1%
Load Regulation: ± 1%
Voltage Tolerance3: ± 2%
Output Power: 3000 W continuous (2400 W for 12 V, 15 V models) - see models chart for specific voltage model ratings
Voltage Range: ±5.0% typical adjustment by potentiometer (VR1)
Hold-Up Time: 14 mS/230 VAC at full load
Turn On Time: 800 mS
Rise Time: 100 mS at full load
Auxiliary Signals
Auxiliary Power: Selectable +5 V/0.5 A or +9 V/0.3 A auxiliary output
Remote: On / Off Control By external switch
Power OK Signal: Open drain signal low when PSU turns on. Max sink current: 20 mA. Max drain voltage: 40 V
Output Voltage Trim: Adjustment of output voltage is between 0 to 105% of rated output
Output Current Trim: Adjustment of output voltage is between 0 to 105% of rated output
Parallel (Current Sharing): Please refer to current sharing with remote sensing (parallel connection) diagram
Reliability
MTBF: >112,000 hours per MIL-HDBK-217F
Protection
Overvoltage Protection :120±7% of Vout, latch type (Recovery after reset AC power ON or inhibit) (Refer to VCI vs. OVP Curve)
Short Circuit Protection: Constant current, auto-recovery
Overload Protection: 105% of rated power, constant current type
Overtemperature: Protection 85±5°C measured on NTC, auto-recovery
Safety
Safety Certifications: Approved to EN/CSA/IEC/UL62368-1
Isolation Specifications
Isolation3: Input-Output: 3000 VAC; Input-Ground: 1500 VAC; Output-Ground: 500 VAC
Isolation Resistance: I/P-O/P, I/P-FG, O/P-FG: 100 Mohms/500 VDC
