Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
ELECTRICAL SPECIFICATIONS
Input
Input range: 85 to 264 VAC, 47 to 63 Hz, 1Ø
Input current: 2.6 A max at 115 VAC, 1.3 A max at 230 VAC
Inrush current: 75 A max., cold start @ 264 VAC input
Input fuses: 6.3 A, 250 VAC fuse provided in both line & neutral
Leakage current
+ Earth leakage current: <500 μA @ 264 VAC, 60 Hz, NC
+ Patient leakage current: <100/500 μA @ 264 VAC, 60 Hz, NC/SFC
Efficiency: >90% typical
No load input power :<0.5 W
Isolation voltage
+ Input/Ground: 2000 VAC (1 MOPP)
+ Input/Output: 4400 VAC (2 MOPP)
+ Output/Ground: 2000 VAC (1 MOPP)
Output
Output Voltage: 48 V
Output Current (fan)1: 5.2 A
Output Power (fan)1: 250 W
Output Current (convection /conduction): 3.6 A
Output Power (convection / conduction): 175 W
Terminations:
+ Input: 3 pin (pin 2 removed); 0.156 Ctr Connector (Class I)
+ Output: 6 pin Header 0.156 Ctr Connector
Ripple and noise: 1% of Vout on all models
Load regulation: 2%
Line regulation: 1%
Total regulation: 5%
Minimum load: Not required
Capacitive load: 1000 μF
Adjustment range: 5%
Initial set point tolerance: ±1 %
Overshoot: <3% overshoot at turn-on, <1% overshoot at turn-off, under all conditions
Monotonic waveform: PSU have monotonic wave forms on the main output at start up, shut down and fault (OVP, OCP, OTP, OPP, SCP) triggered shutdown.
Transient response: 500 μs response time for return to within 0.5% of final value for any 50% load step over the range of 25% to 100% of rated load, ∆i/∆t<0.2 A/μs. Max. voltage deviation is ±3.5% of final value.
Reliability
MTBF: >500K hrs per Telcordia 332, Issue 6, 25°C, full rated load at 110 VAC input.
Electrolytic capacitor lifetime: All specified electrolytic capacitors will exceed 10 year life based on operating at 25°C ambient temp., 24 hrs/day, 365 days/year.
Protection
Overvoltage protection: 115% to 155% of nominal output voltage. Requires AC recycle to reset.
Short circuit protection: Short across the output terminals will not cause damage to the unit. Hiccup mode.
Thermal protection: Will shutdown upon an over temperature condition. Auto-recovery mode.
Overload protection: 130% to 180% of rated output current value. Hiccup mode.
